EN10025-6 S960Q High Tensile Steel Sheet is an ultra-high-strength structural steel produced through quenching and tempering (Q&T). With a minimum yield strength of 960 MPa, S960Q is designed for applications where extreme strength, reduced weight, and high performance are critical.
GNEE Steel supplies premium S960Q steel sheets and plates with reliable quality, full certification, and customized solutions for global engineering projects.
What is EN10025-6 S960Q High Tensile Steel Sheet?
S960Q is part of the EN10025-6 standard for high-strength structural steels. The "S" stands for structural steel, "960" refers to the minimum yield strength (960 MPa), and "Q" indicates quenched and tempered delivery condition.
Key Features:
- Ultra-high yield strength (≥ 960 MPa)
- Excellent strength-to-weight ratio
- Good weldability (with controlled procedures)
- Superior toughness under dynamic loads
- Suitable for extreme structural conditions
low alloy steel plate Chemical property
| C | Si | Mn | P | S | B | Cr | Cu | Mo | Nb | Ni | Ti |
| 0.22 | 0.86 | 1.8 | 0.03 | 0.017 | 0.006 | 1.6 | 0.55 | 0.74 | 0.07 | 2.1 | 0.07 |
high strength steel mechanical property
| Yield strength (Mpa) | Tensile strength (Mpa) | Elongation % | |||||||||||
| TH(MM) | >3≤50 | >50≤100 | >100≤150 | >3 ≤50 | >50≤100 | >100≤150 | 10 | ||||||
| 960 | - | - | 980-1150 | - | |||||||||
Advantages of S960Q High Tensile Steel Sheet
1. Extreme Strength Performance
S960Q offers one of the highest strength levels in structural steels, ideal for critical load-bearing applications.
2. Lightweight Design
High strength allows thinner sections, reducing total structure weight and transportation costs.
3. Excellent Structural Efficiency
Enables optimized design with fewer materials while maintaining safety and reliability.
4. Good Toughness
Maintains performance under impact and low-temperature environments.
5. High Fatigue Resistance
Suitable for dynamic and cyclic loading conditions.
Applications of EN10025-6 S960Q Steel Sheet
S960Q is widely used in industries requiring extreme strength:
- Heavy lifting equipment (cranes, boom arms)
- Mining and construction machinery
- High-performance structural components
- Offshore and energy sector equipment
- Military and specialized vehicles
Equivalent Grades of S960Q Steel
| Standard | Equivalent Grade |
|---|---|
| ASTM | A514 / A517 |
| GB | Q960E |
| JIS | HT950 / HT980 |
These equivalents offer similar ultra-high strength properties across different standards.
S960Q vs Other High-Strength Steel Grades
Comparison Within EN Standards
| Property / Grade | S690Q | S890Q | S960Q |
|---|---|---|---|
| Yield Strength | ≥ 690 MPa | ≥ 890 MPa | ≥ 960 MPa |
| Tensile Strength | 770–940 MPa | 940–1100 MPa | 980–1150 MPa |
| Strength Level | High | Very High | Ultra High |
| Application | Structures | Heavy equipment | Extreme engineering |
Equivalent Grade Comparison
| Property / Grade | S960Q | A514 | Q960E |
|---|---|---|---|
| Yield Strength | ≥ 960 MPa | ≥ 690 MPa | ≥ 960 MPa |
| Standard | EN | ASTM | GB |
| Heat Treatment | Q&T | Q&T | Q&T |
| Application | Advanced structures | Heavy equipment | High-strength machinery |
FAQ – EN10025-6 S960Q High Tensile Steel Sheet
What is S960Q steel mainly used for?
S960Q is used in ultra-high strength structural applications such as cranes, heavy machinery, and offshore equipment.
Is S960Q difficult to weld?
S960Q can be welded, but it requires:
- Preheating
- Controlled heat input
- Proper filler materials
Professional welding procedures are recommended.
What is the difference between S960Q and S690Q?
S960Q has significantly higher strength, allowing for lighter designs but requiring stricter processing control.
Does S960Q require heat treatment after delivery?
No, it is delivered in quenched and tempered condition, ready for fabrication.
Can S960Q be used in low temperatures?
Yes, it offers good impact toughness, especially when specified with additional testing requirements.
What thickness range can GNEE supply?
Thickness: 3mm – 150mm
Width: up to 3500mm
Length: up to 18000mm
Is S960Q more expensive than S690Q?
Yes, but it reduces material usage and improves performance, making it cost-effective overall.
What industries benefit most from S960Q?
Construction, mining, energy, transportation, and heavy equipment industries.
Why choose GNEE Steel for S960Q?
- Stable high-quality supply
- Advanced processing capability
- Fast delivery
- Rich export experience
Why Choose GNEE Steel?
Full quality control from raw material to delivery
Custom cutting, drilling, and machining services
Competitive pricing with reliable lead times
Strong technical support for global projects
Conclusion
EN10025-6 S960Q High Tensile Steel Sheet is a top-tier material for projects requiring extreme strength, durability, and efficiency. Its superior performance makes it indispensable in modern heavy engineering.
Looking for a trusted supplier of S960Q High Tensile Steel Sheet?
GNEE Steel provides:
- Premium quality steel
- Fast global delivery
- Professional support
👉 Send your inquiry today and receive a fast quotation with technical guidance!
high tensile steel sheet Products image
GNEE group team photo
GNEE group customer visit
GNEE Group steel exhibition
We have excellent after-sales service. If you have any questions about EN10025-6 S960Q high tensile steel sheet, you can contact us and we will reply you within two hours.
Relying on many first-class equipment, such as CNC Shearing machine, Press Brake machine, Straightening machine, Roll Bending machine, Flat Bar Machine, Deburring machine etc, GNEE STEEL could provide various semi-productsand extensive forming services to customers.
GNEE STEEL PROCESSING
1.CTL & SL SERVICE (141 SETS)
Currently, GNEE STEEL has imported manyadvanced CTL/SL equipment from Italy and Korea and could provide customized CTL/SL services from cold rolled stainless steel and carbon steel to hot rolled stainless steel and carbon steel as well as strips and ultra-wide sheet.
CTL FACILITIES
Max Length:16500mm
Max Width:2200mm
Max Thickness:25.4mm
Max Yield Strength:1500Mpa
SL FACILITIES
Max Width:2200mm
Max Thickness:18mm
Max slit Quantity:31
Max Yield Strength:1200Mpa
2.CUTTING SERVICE
GNEE STEEL imported lots of advanced cutting machines from Germany, Sweden, America and Japan, including plasmas cutting machine, water jet cutting machine, laser cutting machine, flame cutting machine and saw machine. In order to meet customers' diversified needs, GNEE STEEL also adopts nest working multi-cutting methods and intensive production to improve production capacity and save costs for the customers.
Laser Cutting Machine
Max Cutting Length:40,000mm
Max Width:4,600mm
Max Thickness:100mm
Flame Cutting Machine
Max Cutting Length:40,000mm
Max Width:8,000mm
Max Thickness:500mm
Plasmas Cutting Machine
Max Cutting Length:30,000mm
Max Width:5,000mm
Max Thickness:100mm
Water-jet Cutting
Max Cutting Length:12,000mm
Max Width:4,010mm
Max Thickness:250mm
3.FORMING SERVICE
Steel Plate Roll Bending
Maximum Rolling Thickness: up to 200mm
Maximum Width: 4200mm
Automatic Bending Machine-Press Brake
Max Bending Capability:3000Ton
Max Bending Length:15,000mm
Expert in Bending High-Strength & Wear-Resistant Steels
Punching Machine
Max Width:3,070mm
Max Thickness:8mm
Max Pressure:250t
BEVELING SERVICE
GNEE STEEL beveling platform has edge milling machine, edge planer, flame / plasma groove cutting machine, flame groove cutting robot, desktop chamfering machine, gantry planerand other advanced equipment to provide customers with parts prefabrication services,daily processing of V-type, Y-type, X-type and U-type grooves, and guarantee subsequent processes such as welding and assembly of products.
Milling：
Max Cutting Length:18,000mm
Max Width:4500mm
Max Thickness:120mm
Beveling:
Max Length:16,000mm
Max Thickness:80mm
MACHINING SERVICE
GNEE STEEL owns CNC Portal-type Boring and Milling machine,CNC Floor-type Boring and Milling machine, Vertical Precision 5-axis Milling Machine, Portal-type Planer, Vertical Lathe, Cylindical Grinding machine, Hydraulic Planer and CNC Lathe and could provide fine machining of large spare parts and structural parts for customers.
Gantry Type Boring & Milling Maching Center
Max Length:48000mm
Max Width:12500mm
Max Height:8000mm
Max Diameter:10500mm
Deep-hole Drilling Equipment
Max Driling Depth:1,100mm
Max Bore Diameter:φ80mm
Max Diametar:φ4,500mm
MMulti-hole Drilling Equipment
Max Length:13,000mm
Max Width:10,000mm
Max Bore Diameter:φ105mm
Max Drilling Depth:250mm
Floor Boring And Milling Machine
Max Length:24,000mm
Max Height:8,000mm
Turntable Dimensions:9x5m
Vertical Lathe
Max Height:6,000mm
Max Diametar:φ22,00mm
Automated Edge Milling Machine
The Automated Edge Milling Machine is a leading product in heavy-duty milling equipment. It is primarily used for weld groove preparation (beveling) on large-format plates made of stainless steel, carbon steel, and special steel grades. It can process plates with a maximum thickness of up to 90mm, a length of 16 meters, and a width of 4 meters.
It is equipped with dual milling units and a fully automatic milling cutter head changing system, enabling automated 4-edge beveling. Its standout feature is the profiling technology used when milling wavy plates and irregularly shaped products, which ensures absolute consistency of the groove after milling.
Utilizing specially designed milling cutter heads, it can execute highly difficult and complex groove profiles in a single pass.
Materials: Plain carbon steel, pressure vessel steel, wear-resistant steel, high-strength steel, stainless steel, nickel-based alloys, etc.
Width: 1200 - 4200 mm
Length: 5800 - 16000 mm
Thickness: 5 - 90 mm
Weight: Up to 35 tons
This edge milling machine is the world's premier automated bevel milling equipment. With its excellent structural design and advanced data algorithms, it achieves full automation from plate detection to the actual milling process, significantly improving processing efficiency while guaranteeing high precision.
- Processing Accuracy
Length accuracy: ±1mm when L < 10m; ±2mm when L > 10m;
Width accuracy: ±1mm;
Diagonal accuracy: ±2mm;
Root face accuracy (blunt edge): ±1mm for Y-grooves; +0.5mm for X-grooves.
- Processing Efficiency
The processing efficiency is more than 10 times that of conventional edge milling or edge planing equipment.
HEAT TREATMENT
Heat Treatment Furnace
Max Furnace Size:36x12x13.5m
Max Rated Temperature:1100℃
Max Loading Capacity:800t
Heat Treatment of Pressure Vessels
Heat Treatment of Mining Equipment
Heat Treatment of Tube Sheet
Heat Treatment of Pressure Vessel Head
Case : Steel Plates Supply for 100,000m³ Full Containment Ammonia Storage Tank Project
GNEE STEEL is currently participating in the procurement phase of a 100,000m³ full containment ammonia storage tank project, supplying high-quality steel plates for critical tank components. Due to the corrosive nature of ammonia and the risk of Ammonia Stress Corrosion Cracking (SCC), the project requires strict metallurgical control of materials according to EN 10028-3 standards.
One of the most important technical requirements of this project is the strict limitation of the actual Yield Strength (Re) for all NL2 grade materials. To prevent SCC risks in ammonia storage environments, the actual yield strength must not exceed 390 MPa, regardless of the nominal values specified in the standard or plate thickness ranges. This requirement places higher demands on steelmaking process control, heat treatment stability, and material testing.
Raw high-strength steel plates ready for the 100,000 m³ full containment ammonia storage tank production
Project Materials and Technical Requirements
The project mainly uses P355NL2 and P275NL2 normalized pressure vessel steel plates, which are widely applied in low-temperature storage tanks due to their excellent toughness and weldability.
Key technical specifications include:
- Material grades: P355NL2 and P275NL2 (Normalized)
- Yield strength: Standard minimum / Maximum limited to 390 MPa
- Hardness: ≤ 225 HBW in base material
- Impact testing: Charpy-V notch test at -50°C, minimum 27J
- Certification: EN 10204 3.1 certificate, with optional 3.2 certification
These strict requirements ensure that the steel plates maintain stable mechanical properties and high resistance to ammonia-induced stress corrosion during long-term operation.
Precision rolling and forming of steel plates into curved sections for the 100,000 m³ ammonia storage tank.
Project Plate Quantities and Thickness Distribution
The total steel demand for this ammonia storage tank project is several thousand tons, mainly distributed across different tank sections:
P355NL2 – Inner & Outer Tank Shell Plates
- Lower shell courses: 50 mm thickness – approx. 2,000 tons
- Middle shell courses: 25 mm thickness – approx. 1,400 tons
- Upper shell courses: 10 mm thickness – approx. 500 tons
P275NL2 – Tank Bottom Plates
- Thickness: 10–15 mm – approx. 750 tons
P275NL2 – Suspended Roof Structure
- Thickness: 5–8 mm – approx. 180 tons
S275JR – Outer Roof (Ambient Structure)
- Thickness: 10 mm – approx. 450 tons
To improve tank fabrication efficiency and reduce circumferential welds, the project also requires wide steel plates to minimize welding joints, which helps reduce the potential risk of SCC in ammonia service conditions.
Formed steel segments wrapped and racked for protection, ready for 100,000 m³ ammonia storage tank assembly.
GNEE STEEL provides high-precision steel plate rolling and cylinder fabrication solutions for tank manufacturers worldwide. Send us your plate specifications or fabrication drawings for a fast quotation.
| TYPE | GRADE | SPECIFICATIONS |
| Carbon Steel / Low Alloy Coil | Q235A/B/C/D/Q355B(Q345B)/C/D/E/SS400/SAPH400-C/ASTMA283Grade C |
0.7~2.0*1250/1500mm*C 2.3~19.5*1250/1500/1800/2000mm*C |
| Medium Heavy Plate | Q235B/Q355B(Q345B)/C/D/E | 6.0-200x150mm-4000mmxL |
| Vessel Plate |
Q245R/Q345R/HP295/SA516MGR485/SA516GR70/P355NL2/P275NL2/ S275JR//SPV490/ASTM A537 Class 1/Class 2 |
2.5-120x1500mm-3000mmxL |
| High Strength Steel |
510L/610L/700L/750L/BS600MCK4/BS700MCK2/BS700MCK4/ BS960E/BWELDY700QL2/L4/BWELDY960QL4/HG60D/70D/785D/ Q460D/Q550D/690D/690E/TQ600MCD/TQ700MCD/S700MCD/ WYS600/700/STRENX700MCE/Q490E/Q490D |
1.2-60x 1500mm-2500mmxL |
| Patterned Steel | HQ235A|B | 1.2-60x 1500mm-2500mmxL |
| Wear-resistance Steel |
NM360/400/450/500/NM300TP/400TP/450TP/ ABREX400/450/500/B-HARD450XKY/ CREUSABRO4800/8000/EH C400LE/450LE/500LE/ |
3.0-50x1250mm-3300mmxL |
| Cold Rolled Coil | DC01/RECC/REDT/SPCC/ST12 | 0.5-3.0x1250mm-1500mmxC |
| Galvanized Plate | DC51D+AZ/DC51D+Z/DX51D+Z/SGH340+Z275/Z275/Z120/S350GD+ZM275 | 0.45-3.0x1250mm-1500mmxC |
| Pickled Coil | DD11/SPHC | 2.0-6.0x1500xC |
Stainless Steel Material and Surface Specifications
| TYPE | GRADE | THICKNESS | SURFACE |
| Austenitic | 304/304H/304L/304J1 | 0.25-150mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| Austenitic | 321 | 0.4-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| Austenitic | 316/316L/317L/316Ti | 0.3-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| Austenitic | 201(J1/J2/J5) | 0.35-12mm | 2B/NO.1/1D |
| Ferrite | 430 | 0.4-3.0mm | 2B/BA/NO.4/8K/SB/HL |
| Ultra Pure Ferrite | 443 | 0.4-2.0mm | 2B |
| Ultra Pure Ferrite | 436L/439/444/441 | 0.5-3.0mm | 2B/2D |
Special Steel / Nickel Base Alloy
| TYPE | GRADE | GRADE (ASTM) | GRADE (EN) | THICKNESS |
| Heat-resistant Steel | 309S | S30908 | 1.4833 | 0.5-40mm |
| Heat-resistant Steel | 310S | S31008 | 1.4845 | 0.5-40mm |
| Duplex Stainless Steel | 2101 | S32101 | 1.4162 | 1.5-50mm |
| Duplex Stainless Steel | 2304 | S32304 | 1.4362 | 3.0-50mm |
| Duplex Stainless Steel | 2205 | S32205/S31803 | 1.4462 | 0.5-60mm |
| Duplex Stainless Steel | 2507 | S32750 | 1.4410 | 1.0-60mm |
| Super Austenitic-Steel | 904L | N08904 | 1.4539 | 0.6-50mm |
| Super Austenitic-Steel | 254SMO | S31254 | 1.4547 | 0.5-50mm |
| Super Austenitic-Steel | 1.4529 | N08926 | 1.4529 | 0.5-50mm |
| Super Austenitic-Steel | AL-6XN | N08367 | 1.4478 | 0.5-50mm |
| Nickel Base Alloy | Alloy 31 | N08031 | 1.4562 | 1.0-50mm |
| Nickel Base Alloy | 800 | N08800 | 1.4876 | 0.8-50mm |
| Nickel Base Alloy | 800H | N08810 | 1.4958 | 0.8-50mm |
| Nickel Base Alloy | 800HT | N08811 | 1.4959 | 0.8-50mm |
| Nickel Base Alloy | Alloy 28 | N08028 | 1.4563 | 1.0-20mm |
| Nickel Base Alloy | Alloy 20 | N08020 | 2.4660 | 1.0-20mm |
| Nickel Base Alloy | 825 | N08825 | 2.4858 | 0.8-40mm |
| Nickel Base Alloy | C276 | N10276 | 2.4819 | 0.5-50mm |
| Nickel Base Alloy | C22 | N06022 | 2.4602 | 1.0-50mm |
| Nickel Base Alloy | 625 | N06625 | 2.4856 | 0.8-20mm |
| Nickel Base Alloy | 400 | N04400 | 2.4360 | 1.0-20mm |
| Nickel Base Alloy | 600 | N06600 | 2.4816 | 1.0-50mm |
| Nickel Base Alloy | Pure Ni 201 | N02201 | 2.4061 | 0.5-20mm |
| Titanium | TA1 | Gr.1 | Class 1 | 0.5-50mm |
| Titanium | TA2 | Gr.2 | Class 2 | 0.5-50mm |
Hot Tags: en10025-6 s960q high tensile steel sheet, China en10025-6 s960q high tensile steel sheet manufacturers, suppliers, factory, high strength low alloy steel plate for machinery, S355 Round Bar, low alloy steel sheet packaging, high strength steel plate bending, high strength low alloy steel plate supplier, high strength low alloy steel plate yield strength
