Abrasion Wear Resistant Plate
Wear-resistant steel plate refers to the special plate products specially designed for use under the conditions of large-area wear and tear. Commonly used wear-resistant steel plate is in the toughness, good plasticity of ordinary low carbon steel or low alloy steel surface through the surfacing method of a certain thickness of high hardness, excellent wear resistance alloy wear layer and made of plate products. In addition, there are cast wear-resistant steel plate and alloy quenching wear-resistant steel plate.
Execution standards and steel grades of wear-resistant steel plates we can provide
Sweden:NM400,NM450,NM500,NM600,SB-50,SB-45
Germany:XAR400,XAR450,XAR500,XAR600,Dillidur400,Dillidur500
Japan:JFE-EH360,JFE-EH400,JFE-EH500,WEL-HARD400,WEL-HARD500
GB/T standard abrasion resistant steel plate chemical composition
|
Grade |
c |
Si |
Mn |
P |
S |
Al |
Cr+Ni+Mo |
Nb+V+Ti |
|
NM400 |
0.10-0.40 |
0.20-0.40 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 0.9 |
Trace Amount |
|
NM450 |
0.10-0.40 |
0.20-0.40 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 1.2 |
|
|
NM500 |
0.10-0.40 |
0.20-0.45 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 1.5 |
|
|
NM550 |
0.10-0.50 |
0.20-0.45 |
1.00-1.50 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 2.0 |
|
|
NM600 |
0.10-0.50 |
0.20-0.45 |
1.00-1.50 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 2.5 |
|
|
XCHD400 |
0.10-0.30 |
0.20-0.40 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 0.1 |
|
|
XCHD450 |
0.10-0.40 |
0.20-0.40 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 0.9 |
|
|
XCHD500 |
0.10-0.40 |
0.20-0.45 |
1.00-2.00 |
Max 0.015 |
Max 0.003 |
Min 0.020 |
Max 1.5 |
GB/T standard ar plate steel mechanical property
|
Grade |
Thickness(mm) |
Tensile Strength/Mpa |
Enlongation/% |
-20ºC Longitudinal Impact Value/J |
Hardness/HB |
|
NM360 |
<80 |
≥1100 |
≥12 |
≥24 |
330-390 |
|
NM400 |
<80 |
≥1200 |
≥10 |
≥24 |
370-430 |
|
NM450 |
<80 |
≥1250 |
≥7 |
≥24 |
420-480 |
|
NM500 |
<70 |
/ |
/ |
≥24 |
≥470 |
|
NM550 |
<70 |
/ |
/ |
/ |
≥530 |
|
NM600 |
<60 |
/ |
/ |
/ |
≥570 |
GB/T standard wear resistant plate testing results
|
Testing results of wear resistant steel plates different thickness |
|||||
|
Grade |
Thickness(mm) |
Hardness/HB |
Tenslile strength/MPA |
Enlongation |
-20ºC Longitudinal Impact Value/J |
|
NM400 |
6 |
406 |
1280 |
16 |
76/87/65 |
|
NM400 |
20 |
404 |
1260 |
17.5 |
57/57/65 |
|
NM400 |
50 |
398 |
1300 |
25.5 |
40/35/45 |
|
NM400 |
80 |
417 |
1320 |
23.5 |
48/51/49 |
|
NM450 |
6 |
439 |
1320 |
23 |
43/38/30 |
|
NM450 |
20 |
448 |
1460 |
24 |
62/52/66 |
|
NM450 |
50 |
444 |
1340 |
21 |
35/37/40 |
|
NM450 |
80 |
454 |
1410 |
21.5 |
40/41/49 |
|
NM500 |
6 |
485 |
1653 |
11.5 |
33/26/32 |
|
NM500 |
20 |
505 |
1730 |
17.5 |
36/33/30 |
|
NM500 |
50 |
499 |
1569 |
16.5 |
42/38/32 |
|
NM500 |
70 |
488 |
1540 |
12.5 |
60/55/64 |
|
NM550 |
6 |
540 |
1853 |
10.5 |
/ |
|
NM550 |
20 |
545 |
1855 |
11.5 |
/ |
|
NM550 |
50 |
550 |
1900 |
10.5 |
/ |
|
NM550 |
70 |
545 |
1840 |
12 |
/ |
|
NM600 |
6 |
575 |
/ |
/ |
/ |
|
NM600 |
20 |
580 |
/ |
/ |
/ |
|
NM600 |
50 |
582 |
/ |
/ |
/ |
|
NM600 |
70 |
578 |
/ |
/ |
/ |
abrasion resistant steel plate structure characteristics
Resistant steel plate consists of two parts: low carbon steel plate and alloy wear-resistant layer, and the alloy wear-resistant layer is generally 1/3~1/2 of the total thickness.When working, the substrate provides the comprehensive performance of strength, toughness, and plasticity to resist the external force, and the alloy wear-resistant layer provides the wear-resistant performance to meet the needs of the specified working conditions.
Wear steel plate alloy wear-resistant layer and the substrate is a metallurgical combination. Through special equipment, using automatic welding process, high hardness self-protection alloy wire uniformly welded on the substrate, the number of composite layers of one layer to two layers to multi-layer, the composite process due to the alloy shrinkage ratio is different, there is a uniform transverse crack, which is a significant feature of the wear-resistant steel plate.
Alloy wear-resistant layer is mainly dominated by chromium alloy, but also add manganese, molybdenum, niobium, nickel and other alloy components, the metallographic organization of carbide was a fibrous distribution, the direction of the fibers perpendicular to the surface. Carbide microhardness can reach HV1700-2000 above, the surface hardness can reach HRC58-62. alloy carbide in the high temperature has a strong stability, to maintain high hardness, but also has a very good antioxidant properties, within 500 ℃ completely normal use.
Wear-resistant layer manifestation form has a narrow channel (2.5-3.5mm), wide channel (8-12mm), curve (S, W), etc.; mainly chromium alloy is the main, but also add manganese, molybdenum, niobium, nickel, boron and other alloy components, metallurgical organization of the carbide is a fibrous distribution, the direction of the fibers perpendicular to the surface. Carbide content of 40-60%, microhardness can reach more than HV1700, surface hardness can reach HRC58-62.
Abrasion resistant steel sheet is mainly divided into three categories: general-purpose, impact-resistant and high-temperature-resistant; the total thickness of wear-resistant steel plate can reach a minimum of 5.5 (2.5+3) mm, and the thickest thickness can reach 30 (15+15) mm; wear-resistant steel plate can be rolled into wear-resistant pipes with a minimum diameter of DN200, and can be processed into wear-resistant elbows, wear-resistant tees, wear-resistant reducers.
abrasion resistant steel sheet application range
Abrasion resistant wear plates has high wear resistance and good impact performance good, able to cut, bend, weld, etc., can be taken to weld, plug welding, bolting and other ways to connect with other structures, in the maintenance of the site process has a time-saving, convenient and so on, is widely used in metallurgy, coal, cement, electric power, glass, mining, building materials, masonry, etc., and other materials, compared to other materials, has a high cost-effective price, has been more and more industries and manufacturers of the favor.
abrasion resistant metal Products image


GNEE group team photo

GNEE group customer visit

We have professional online service personnel. If you have any questions about Abrasion Wear Resistant Plate, please send us an inquiry and we will reply to you within one working day.
Hot Tags: abrasion wear resistant plate, China abrasion wear resistant plate manufacturers, suppliers, factory, abrasion resistant steel chains, tungsten abrasion resistant steel, seamless abrasion resistant steel pipe, square abrasion resistant steel, abrasion resistant steel sleeves, abrasion resistant steel pipe









