SA514 GradeE High Strength Low Alloy Sheet
SA514 GradeE high yield strength steel plate offered by GNEE is a high-strength weldable steel plate used in places where high tensile and yield strengths are required, such as lifting gears for construction vehicles and racks for offshore platforms.
The impact function of SA514 GradeE high toughness steel plate is high, and the value of impact function is over 60J according to different thickness and temperature conditions. These excellent mechanical properties enable SA514 GradeE hsla steel sheet to perform well under heavy loads and impact loads, while also improving service life.
high strength plate Chemical property
| C | Mn | P | S | SI | Ni | Cr | Mo | V | Ti | Zr | Cu | B |
| 0.12-0.20 | 0.40-0.70 | ≤0.035 | ≤0.04 | 0.20-0.35 | ~ | 1.40-2.00 | 0.40-0.60 | ~ | 0.04-0.10 | ~ | 0.20-0.40 | 0.0015-0.0050 |
High Tensil Low Alloy Steel Plates (HSLA) mechanical property
| Thickness Inch | Yield Strength Mpa | Tensile Strength Mpa | Elongation in 50mm | Hardnees Brinell | ||||||||
| less 3/4 inch | 690 | 760-895 | 18 | 235 | ||||||||
| over 3/4 to 2 1/2 | 690 | 760-895 | 18 | ~ | ||||||||
| over 2 1/2 to 6 inch | 620 | 690-895 | 16 | ~ | ||||||||
low alloy steel material Products image
GNEE group team photo
GNEE group customer visit
GNEE Group steel exhibition
We have excellent after-sales service. If you have any questions about SA514 GradeE high strength low alloy sheet, you can contact us and we will reply you within two hours.
Hot Tags: sa514 gradee high strength low alloy sheet, China sa514 gradee high strength low alloy sheet manufacturers, suppliers, factory, A633 High Strength Steel Plate, high tensile steel, Low Alloy Steel Plates, high strength alloy steel, A588 HSLA Steel Plate, Low Alloy Structural Steel
